I did all the steps but same result

in no.19: Click Allow access when prompted by a Windows Security Alert dialog.

didn’t appeare to me, any other solution?

mr Arden Packeer

I have windows 7 home premium 64 bit

when I run the daynamips I get this error :

Reading configuration file…

*** Warning: received dynamips error:
206-unable to create VM instance ‘R1′
*** Warning: received dynamips error:
206-unable to create VM instance ‘R2′

*** Error: errors during loading of the topology file, please correct them
Press ENTER to continue

in windows xp work ok. but I want it to work in windows 7.

how can I solve this problem?

and this my file.net:

# This is my CCNA & CCNP Tranining Lab

autostart = False
[Anwar-PC]
[[3640]]
image = C:\Program Files\Dynamips\images\c3640-jk9o3s-mz.123-14.T7.extracted.BIN
#idlepc =
nvram = 128
disk0 = 64
disk1 = 64
confreg = 0×2102

#############
[[ROUTER R1]]
#############
model = 3640
console = 2001
ram = 96
mmap = false

slot0 = NM-4E
slot1 = NM-4T

S1/0 = FRSW 1
S1/1 = R3 S1/1

#############
[[ROUTER R2]]
#############
model = 3640
console = 2002
ram = 96
mmap = false

slot0 = NM-4E
slot1 = NM-4T

S1/0 = FRSW 2
E0/0 = sw1 F1/2

#############
[[ROUTER R3]]
#############
model = 3640
console = 2003
ram = 96
mmap = false

slot0 = NM-4E
slot1 = NM-4T

s1/0 = FRSW 3
e0/0 = sw2 F1/3

#############
[[ROUTER sw1]]
#############
model = 3640
console = 2004
ram = 96
mmap = true

slot1 = NM-16ESW
F1/11 = sw2 F1/11
F1/12 = sw2 F1/12

#############
[[ROUTER sw2]]
#############
model = 3640
console = 2005
ram = 96
mmap = true

slot1 = NM-16ESW

##############
[[FRSW FRSW]]
##############

2:221 = 1:122
3:321 = 1:123

Thank you

I just installed Dynamips and noticed that are no router images in C:\Program Files\Dynamips\images. I got c7200 image, but it is in xx.bin format. I cann’t unzip it on my PC and place it ../images folder. Please advice. Thanks. What images should I put there?

Thanks a million for easing up things. I need help with IDLEPC values for R2. I saved the Idlepc Value for R1, however as soon as I start R2, CPU shoots 100% again. Should I be repeating the same process for saving idle pc value for R2 aswell ? When I try to , it does not let me, stating to remove the earlier value from dynagenidledb.ini. How do I go around for the idlepc value of R2.
Please help. Many Thanks in advance.

Simple lab

[localhost]

[[7200]]
image = \Program Files\Dynamips\images\c3640-is-mz.122-7.bin
# On Linux / Unix use forward slashes:
# image = /opt/3640-images/c3640-is-mz.122-7.bin
npe = npe-400
ram = 160

[[ROUTER R1]]
s1/0 = R2 s1/0

[[router R2]]
# No need to specify an adapter here, it is taken care of
# by the interface specification under Router R1

Bashir