point-to-multipoint
Tutorial: IPv6 Tunnels Part 1 - Manual GRE & IPv6IP Tunnels
Lets face it, sooner or later we are going to move to IPv6. Probably closer to the sooner side than some of us are comfortable with. In this series of articles we will be introducing tunnels and taking a look at how they can be used as part of you migration towards IPv6. Working with IPv6 tunnels is also an important part of a CCIE candidate’s journey, so mastering them is important. In this article we will be looking at tunnelling IPv6 over IPv4 using manual tunnels specifically using GRE and IPv6 in IPv4.
Tutorial: OSPF Network Types and Frame Relay Part 4
In our previous tutorials (you can find Part 1 here, Part 2 here and Part 3 here) we looked at the different OSPF network types and how they apply to a partial mesh Frame-Relay Hub and spoke topology. In normal situations that would be enough, but this is the CCIE we are preparing for! We have to understand how the different network types work together. This is incase the proctor decides to not allow you to use certain types of OSPF networks on one interface or does not allow you to use the ip ospf network commands on others. Evil Proctors :)
Tutorial: OSPF Network Types and Frame Relay Part 2
In our last article we looked at the Broadcast and Non-Broadcast OSPF network types. We will be continuing our OSPF Network Type series of articles by looking at Point-to-Multipoint and Point-to-Multipoint Non-Broadcast network types.
Categories
Twitter Feed...
- Sitting at the docklands listening to the band play acoustic matchbox 20 http://twitpic.com/kt11
- At the horse races http://twitpic.com/jtqv
- @ccietalk LOL. just taking a break! This is my first summer in two years that I haven't been studying!
- @joshatterbury dude that is my kind of diet!
- James squire tasting paddle. 5 beers. Heaven http://twitpic.com/jpdj
Follow me...
Recent Comments
- diriger on Tutorial: IPv6 Tunnels Part 2 - Automatic 6to4 Tunnels
- csyeo on Blog: My IPexpert Voice Stuff Has Arrived!
- Arden Packeer, CCIE #20716 on Tutorial: How to use Cisco MQC & NBAR to filter websites like Youtube
- Dan on Tutorial: How to use Cisco MQC & NBAR to filter websites like Youtube
- Ricardo on Configuring Priority Queuing
Most Emailed
- Tutorial: How to use Cisco MQC & NBAR to filter websites like Youtube - 10 emails
- Tutorial: What is the difference between bandwidth percent and bandwidth remaining percent? - 10 emails
- Tutorial: OSPF Network Types and Frame Relay Part 1 - 7 emails
- Tutorial: How to set up a basic Dynamips Lab using Dynagen, Part 1 - 6 emails
- Tutorial: OSPF Network Types and Frame Relay Part 4 - 3 emails
